Feature
(1)X-type 3D movement alignment technology, high quality and low loss
(2)American industrial grade ATMEL chip, new quad-core industrial processor
(3)No mirror design, shortening core time and improving work efficiency
(4)Ultra high compression ratio cell: 280 welds + heating
(5)Germany imported ceramic hammers, durable
(6)Modular integral bracket design
(7)All-round fixture for all types of fiber
(8)7 seconds quick fusion, 18 seconds heating time
(9)Adapt to harsh environments, waterproof, dustproof, wind resistant, anti-fall, high temperature, high altitude
Model number | NS-90 Fusion splicer |
Applicable Fibers | Singlemode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655), BIF/UBIF(G.657) |
Cladding Diameter | 80 μm to 150 μm |
Coating Diameter | 100 μm to 1,000 μm |
Fiber Cleave Length | 8 to 16 mm;10-60mm |
Typical Average Splice Loss | 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards |
Splicing Time | SM FAST mode — 6 seconds Pyrocondensation Time-8seconds |
Arc Calibration Method | Automatic, real-time, and by using results of the previous splice when in AUTO mode, manual arc calibration function available |
Splicing Modes | Multiple welding modes (SM NZ DS MM 62um G657A G657B, etc.) |
Storage of Splice Result | Last 2,000 results to be stored in the internal memory |
Fiber Display | X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation |
Magnification | X or Y:300 X |
Viewing Method | Dual cameras with 4.3 inch TFT color LCD monitor |
Operating Condition | 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C /Max wind velocity of 15M/S |
Return loss | >60dB |
Pull | 3000-5000/One pair for Standby application |
Weight | 1.5KG |
Warranty | 1 years warranty and lifespan technology support |